Automobiles come in a range of shapes, heights, and sizes, ranging from a classic Mini Cooper to a 50-ton 18-wheeler towing a trailer or a tractor towing a trailer. explained in the post It becomes much more difficult to operate and maintain control of a motor vehicle as its size increases, for reasons that will be explained later in this article. When driving a large truck, extra caution should be exercised at all times; this is not to suggest that ordinary vehicles should not be driven with caution! If you own a truck or are looking to buy one, here are some things to bear in mind when driving a big truck:
Make sure your mirrors are properly calibrated for your height and driving position. To check blind spots and the back of the vehicle, larger trucks also only have the left and right mirrors. When driving, bear in mind that there might be a vehicle behind you that you are unable to see due to your size.
When turning left or right, particularly right (country specific; not everyone drives on the right or left side of the road), make sure to take wide corners; wide corners are needed due to the vehicle’s length. Taking corners too closely can be dangerous and lead to a serious accident. One way to avoid an unfortunate incident is to slightly pass your turn so that you are square with the turn; this would ensure you are on the opposite side of the road while manoeuvring and you will always need to give way to oncoming traffic; however, if you take it slow and quick, many drivers will be courteous and let you take your corner.
Keep an eye out for low bridges, overhanging trees, and overhead power lines. Knowing the vehicle’s height and width will help you prevent any incidents or collisions with the obstacles. Many seasoned drivers face difficulties in this situation. A low bridge or low overhead cables would usually attract a lot of attention. Trees and other natural environmental factors, on the other hand, would almost certainly have no warning.