Business

How to Install a Garage Door Repair

You might be wondering how you can save money on the installation and configuration if you purchased a brand new garage door. You may want to try installing the garage door on your own if you’re a handyman and have a few hours or days) in front of you. But how do you do so before it is even mounted without damaging the door and paying for repairs? The key steps to establishing a garage door on your own are outlined in this post.
Feel free to visit their website at Arlington Garage Door Service for more details.
Collect the Tools needed
To successfully mount your garage doors, you can need equipment such as a screwdriver, a power drill, nails, screws, bolts and brackets. Make sure the tools are close to you, and you can preferably use the parts that the manufacturer has already supplied.
The Old Garage Door is gone
If this move hasn’t already been completed, before you can install the new one, you will have to undo the old door. You can then undo the track mechanism and remove the door panels by unbolting the pulley system and unscrewing the hardware (springs, rollers, etc.). To stop making them collapse on you, delete panel after panel. Make sure that during the process, children and/or pets are away from the garage, as pieces can fall down to the floor.
Set the Panels Up
You will start placing the metal tracks on the walls once you mount the door and probably prepare the first panel by adding it to the doorway. On the first panel, you can then add the brackets and rollers. To mount the rollers on the left and right side of the doorway, ask a friend or family member to help lift the second panel and use a power tool to screw the hinges onto the panel. For the last panel, repeat the procedure.
Terminate Installation of Tracks
Link the brackets of the jamb to the tracks and then firmly connect them to the framing bits. Make sure these components are not screwed too tightly, because you will have to start the process all over again if the door is not level. To finish installing the horizontal tracks, you can then screw the track hanger onto the wall. To help the track, it will need to be cut to the required length.

Related Posts